Parkzone T-28 Trojan 3530
Availability: Out Of Stock
| |
 |
 |
 |
 |
 |
The Parkzone T-28 3530 series motor mount is CNC machined from billet aluminum. A key feature to this mount is that it utilizes the stock plastic mount as a buffer zone in the event of a crash. The very inexpensive and easily replaceable stock plastic mount should take the impact instead of damaging the planes fuselage. Simply bolt on and you are ready to fly.
Three step installation:
- Attach new motor to aluminum mount with the motors supplied screws
- Attach Parkzone stock plastic mount using the original motor screws
- Attach entire assembly to the planes fuselage with the original mounting screws
Included: 1 - Parkzone T-28 3530 Aluminum Motor Mount. with propeller spacer
Weight: 7g
Notes:
For proper cowl to propeller clearance on the 3530 motors that utilize the bolt on propeller shaft you will use the supplied prop spacer plus the flat washer that comes with the new motor as shown in the pictures. If using a standard 4mm motor shaft, or pressing the shaft forward on the motors utilizing a bolt on shaft, the stock collet adapter and nut will work great. If using the bolt on propeller shaft style motor you will need to either press the motor shaft forward and use a collet adapter, or slightly enlarge the cowl opening to clear the bolt-on propeller shaft.
Compatible Motors
There is a large selection of motors to choose from. Here are a few options.
- Turnigy 35-30C 1100KV (and other KV)
- Heads Up RC 3530-11
- RC Timer BC3530-14 1100KV
- Others in the 3530 series with bolt patterns shown below
Acceptable bolt patterns (units in mm):
- 19x19
- 19x25
Please contact us with any questions on motor compatibility.