E-Flite Extra 300 3D 1.3m Motor Mount 16x25
Availability: Out Of Stock
| |
 |
Our E-Flite Extra 300 3D 1.3m Motor Mount 16x25 is CNC machined from billet aluminum. These motor mounts are designed for 3mm screws with 16mm x 25mm slots to allow for the stock motor and a large variety of aftermarket brushless motors. They are a 100% bolt on replacement for the stock motor mount.
Very strong and light weight. No more worries of cracking or breaking a motor mount.
Installation:
-
Remove the stock motor mount from motor board.
-
Install motor onto new motor mount with supplied 3mm screws.
-
Install assembly back onto motor board with supplied #4 screws.
Included: Qty. 1 - E-Flite Extra 300 3D 1.3m Motor Mount 16x25, 4 - M3 x 6 Motor Screws, 4 - #4 x 1/2" Motor Board screws.
Weight: 8.4.g
Dimensions:
Slot width: 3mm
Slot Length: 16mm to 25mm
Thickness: 3.18mm
Center Hole: 10.8mm Diameter
Compatible Motors:
- Motors utilizing 3mm screws with motor bolt spacing as follows:
- 16 x 16mm
- 16 x 19mm
- 19 x 19mm
- 19 x 25mm
- 25 x 25mm
Note: If there is a collar attached to the motor shaft on the back of the motor, make sure it is smaller than 10.5mm diameter to fit through the center hole of the X mount.
Please contact us with any questions