Parkzone F4U Corsair 3542

The Parkzone Corsair 3542 series motor mount is CNC machined from billet aluminum.  A key feature to this mount is that it utilizes the stock plastic mount as a buffer zone in the event of a crash. The very inexpensive and easily replaceable stock plastic mount should take the impact instead of damaging the planes fuselage. Simply bolt on and you are ready to fly.

Three step installation:

1. Attach new motor to aluminum mount with the motors supplied screws
2. Attach Parkzone stock plastic mount using the original motor screws
3. Attach entire assembly to the planes fuselage with the original mounting screws

Included: 1 - Parkzone Corsair 3542 Aluminum Motor Mount. with propeller spacer

Weight: 4.5g

Notes:

For the 3542 series motors the cowl will need to be modified to accommodate these larger motors by slightly enlarging the front opening. The included propeller spacer may or may not be needed depending on which propeller is chosen. Please note that these 3542 motors may exceed the capability of the planes airframe. Special care should be taken when flying at the extreme speeds these planes will be capable of.

Compatible Motors

There is a large selection of motors to choose from.  Here are a few options.

• Turnigy D3542/5 1250KV
• Turnigy AerodriveXP SK 3542-1250KV
• Heads Up RC 3542-10
• RC Timer BC3542-6 1000KV
• Others in the 3542 series with bolt patterns shown below

Acceptable bolt patterns (units in mm):

• 19x19
• 19x25

Propeller Compatibility:

• Stock 2  blade T28 / Corsair 9.5x7.5 (must use stock collet adapter)
• Stock 3 blade T28 / Corsair 9x7.5 (must use stock collet adapter)
• Stock 2 blade P51 9x6
• MAS 10x7x3
• There are quite a few other options depending on the performance desired

Please contact us with any questions on motor compatibility.

Write a review