FMS / Airfield Prop Adapter for Turnigy 42xx Series

These propeller adapters are CNC machined from billet aluminum.  They are designed to be used with the FMS / Airfield 1400mm and 1450mm models.  These prop adapters will allow the use of the planes original propeller hubs onto the Turnigy 42xx series and similar outrunner motors keeping the great scale looks of these models.  They have the proper hex nut machined right into the shaft for a perfect fit.

Compatible FMS / Airfield Models (1400 / 1450mm size):

P-51D
T28
Corsair

** We will add to this list as we test fit more models **
** For models currently not on the list, please verify dimensions below or contact us **

Installation:

1. Attach new propeller adapter to new motor utilizing the motors prop adapter screws

Included: 1 -  CNC Machined FMS 42 Series Propeller Adapter.

Weight: 14.1g

If your motor is not listed in the Compatible Motors list, please verify hole alignment with the dimensions below.
You can also view the dimensions drawing shown in the photos above.

Shaft Diameter:  8mm
Shaft Length: 48.7mm
Base Thickness:  8.5mm
Overall Length: 57.2mm
Hex Nut (flat to flat): 9mm
Mounting Holes (center to center): 17mm
​Alignment Pocket (back of adapter): 12mm diameter / 4.7mm deep
 

Notes:

- Due to different style hubs FMS / Airfield have available,  please verify the hub you will be using will accept a 9mm flat to flat hex nut.   The 8mm version will not fit these adapters.
- These are designed for propeller hubs requiring the hex nut for engagement and an 8mm hole.
- The use of an aftermarket motor on the FMS / Airfield may require an aftermarket or modified motor mount to adjust for the length of the new motor used.
- This adapter is for the 42xx series motors that have 4 mounting holes for the prop adapter.

Compatible Motors

• Turnigy 42xx series
• EMP N42xx series
• others utilizing the same prop adapter bolt pattern and center hub diameter

Please contact us with any questions on motor compatibility.

Write a review