FMS 1400 / 1450 Universal Motor Mount 25x30
Availability: In Stock
| |
 |
Our FMS 1400 / 1450 Universal Motor Mount 25x30 is CNC machined from billet aluminum. These motor mounts are designed for 4mm screws with 25mm x 30mm slots to allow for a large variety of aftermarket brushless motors. They are a 100% bolt on replacement for the stock motor mount.
Very strong and light weight. No more worries of cracking or breaking a motor mount.
Model Compatibility:
- FMS 1400mm P-40B Warhawk
- FMS 1500mm P-47D Razorback
- FMS 1400mm T-28 V4
- FMS 2000mm Beaver
- * FMS 1400mm P-51D
- * FMS 1400mm P-51B
- * FMS 1400mm F4U Corsair
- * FMS 1400mm T-28 V3
- * FMS 1400mm BF-109
- * FMS 1400mm FW-190
- * FMS 1300mm Extra 300
- * FMS 1300mm Yak 54
- * FMS 1300mm Edge 540
- * FMS 1300mm Sbach 342
* Please note that the last 10 models listed come stock with 3mm motor mounting screws spaced at 16x19mm.
If using the stock motor on these models you will want to use our FMS 1400 / 1450 Universal Motor Mount 16x25.
Installation:
-
Remove the stock motor mount from motor board.
-
Install motor onto new motor mount with supplied screws.
-
Install assembly back onto motor board with original screws.
Included: Qty. 1 - FMS 1400 / 1450 Universal Motor Mount 25x30, 4 - M4 x 8 Screws
Weight: 7.7.g
Dimensions:
Slot width: 4mm
Slot Length: 25mm to 30mm
Thickness: 3.18mm
Center Hole: 15.25mm Diameter
FMS Models available at 
Compatible Motors:
- Motors utilizing 4mm screws with motor bolt spacing as follows:
- 25 x 25mm
- 25 x 30mm
- 30 x 30mm
Please contact us with any questions