Multiplex Easy Cub Universal
Availability: In Stock
| |
 |
 |
 |
 |
Our Easy Cub Aluminum Motor Mount is CNC machined from billet aluminum. It is designed to adapt a large range of 35mm brushless outrunner motors to the Multiplex Easy Cub for an excellent upgrade in performance.
The solid aluminum construction helps eliminate vibration problems common with these planes. The stock thrust angle adjustments are retained for precise control allowing you to fine tune the flying characteristics of this model. We have also included cooling holes to allow better airflow into the cowl.
This mount is a direct swap with the stock plastic mount. Simply bolt on and you are ready to fly.
Two step installation:
- Attach new motor to aluminum mount with the supplied screws
- Attach entire assembly to the planes fuselage using the stock thrust angle screws and mounting screws
Included: 1 - Multiplex 19x30 Aluminum Motor Mount with 4 motor mounting screws
Weight: 12.6g
Compatible Motors
There is a large selection of motors to choose from. Here are a few options.
- Turnigy Aerodrive SK3 3536 1050KV (and other KV options in this series)
- Turnigy Aerodrive SK3 3542 1000KV (and other KV options in this series)
- Heads Up RC Firepower 480 Sport, 10 Sport, 15 Sport
- Heads Up RC Emax GT2815/07 1100KV
- Heads Up RC Emax GT2820/06 985KV
- AXI 2820 series
- E-flite Power 10/15/25/32 (shaft must be pushed through the back)
Please Note: For the 28xx Multiplex suggested Himax brushless motors with a 16x16mm or
16x19mm bolt pattern use our Multiplex Easy Cub AXI - E-Flite - RimFire Aluminum Mount
Acceptable bolt patterns (units in mm):
- 19x25
- 25x25
- 30x30
Please contact us with any questions on motor compatibility