Universal Pusher Adjustable Motor Mount 28 / 35mm Outrunner

Universal Pusher Adjustable Motor Mount 28 / 35mm Outrunner
Part # AP 16x25
Availability: Out Of Stock
Price: $15.95
   - OR -   
0 reviews  0 reviews  |  Please Login To Review This Product

Universal Pusher Adjustable Motor Mount 28 / 35mm Outrunner Universal Pusher Adjustable Motor Mount 28 / 35mm Outrunner Universal Pusher Adjustable Motor Mount 28 / 35mm Outrunner

 


This two piece mount is CNC machined from billet aluminum.  It is designed to adapt a large range of 28mm and 35mm diameter outrunner motors to your pusher style plane. It will allow for the motor to be mounted up to 1" higher than the stock position allowing for up to a 2" large diameter propeller.

With this feature you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quiet platform.

Swapping motors can easily be done by removing a few screws. This is ideal for those looking to achieve the best performance possible.

Three step installation:

  1. Attach motor mount base to the plane with supplied flat head screws, washers, and locking nuts.
  2. Attach new motor to motor plate with supplied flat head screws.
  3. Attach motor plate to motor base with suppled pan head screws.

Included: 1 - AP 16x25 Motor Mount Set

Total Weight: 14g (not including mounting hardware)

Notes:

A 35mm outrunner will only fit in the top position.  A 28mm outrunner will work in the two lower positions. If a change in thrust angle is needed, simply add a small washer between the motor base and motor plate at the appropriate locations.

Center of Gravity should always be checked and adjusted per the user manual after installation of a new motor.


Compatible Motors

  • 35mm Outrunners
  • 28mm Outrunners

Due to the large variety of compatible motors Please verify motor size and KV will suite flying style

Acceptable bolt patterns (units in mm):

  • 16x16
  • 16x19
  • 19x19
  • 19x25
  • 25x25

Please contact us with any questions on motor compatibility

Write a review

Please Login To Review This Product
Powered By OpenCart
Small Parts CNC © 2018