X-UAV Super Sky Surfer 2000 Adjustable Motor Mount

X-UAV Super Sky Surfer 2000 Adjustable Motor Mount
Part # SSS 2000
Availability: Out Of Stock
Price: $19.95
   - OR -   
0 reviews  0 reviews  |  Please Login To Review This Product

X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount X-UAV Super Sky Surfer 2000 Adjustable Motor Mount

 


This two piece mount is CNC machined from billet aluminum.  It is designed to adapt a large range of 35mm and 42mm diameter outrunner motors to the X-UAV Super Sky Surfer 2000.  It will allow for four different motor mounting heights to accommodate propeller sizes up to 13" in diameter.

With this setup you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quiet platform.

Swapping motors from a 35mm outrunner with a 9" prop to a 42mm outrunner with a 12" prop can easily be done by removing a few screws.  There are a large number of motor / propeller combinations possible with this setup.  This is ideal for those looking to achieve the best performance possible for their FPV platform.

Position 1: stock height up to a 9" prop.
Position 2: (+) 0.47" for up to a 10" prop.
Position 3: (+) .95" for up to an 11" prop.
Position 4: (+) 1.42" for up to a 12" prop.

Three step installation:

  1. Install base tube into the plastic nacelle and secure in place with the 4 socket head screws (allen wrench included)
  2. Attach new motor to motor plate with supplied flat head screws.
  3. Attach motor plate to motor base tube at desired height with suppled pan head screws.

Included: 1 - SSS 2000 Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws,  4 base tube socket head screws, 1 allen wrench.

Total Weight: 41g

Notes:

The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations.

Center of Gravity should always be checked and adjusted per the user manual after installation of a new motor.

 


Compatible Motors

  • 35mm Outrunners
  • 42mm Outrunners

Due to the large variety of compatible motors Please verify motor size and KV will suite flying style

Acceptable bolt patterns (units in mm):

  • 19x19
  • 19x25
  • 25x25
  • 25x30
  • 30x30

Please contact us with any questions on motor compatibility

Write a review

Please Login To Review This Product
Powered By OpenCart
Small Parts CNC © 2018